NEMA 4X (IP66)
Enclosed AC Drives
For harsh, wet & dirty environments

Home » AC Drives » NEMA 4X Enclosed AC Drives for Harsh Environments

Overview

- Switched -

version with keypad, display, speed pot, forward/off/reverse switch, and power isolator switch.

- Unswitched -

version with keypad and display.

NEMA 4X (IP66)

FEATURES

40°C ambient temperature
Conduit cable entry
Padlockable power switch
ModbusRTU port
ABS moldings & corrosion resistant heat sink
All standard drive features included
Brake standard on sizes 2 & 3
Optional internal Ethernet size 2 & 3
Standards - UL, C-UL, CE, C-Tick

Options:

drive.web savvy smart programmable automation
savvyPanel graphical, touch screen operator technology
Easy, off site Internet access to the complete system Ethernet peer to peer networking
Ethernet ModbusTCP and EIP
Additional smarty i/o option

Smart, touch screen operator station technology by Bardac Drives

NEMA 4X ... very smart drives!

The drive.web automation technology uses distributed control over Ethernet to provide cost effective systems integration for systems of any size or complexity.

- drive.web smart automation -

Powerful programmable control functions
Peer-to-peer over Ethernet
Smart iPad or touch screen PC operation
Easy system wide Internet access

NEMA 4X (IP66)

MODEL NUMBERS

P2 SERIES
OPEN/CLOSED LOOP VECTOR DRIVES

With EMC filter, brake transistor +/- DC bus

E3 SERIES
GENERAL PURPOSE VFD

230V, SINGLE PHASE IN, 230V, 3-PHASE MOTOR

Model	HP	Amps	Frame Size
P2-22010-1HF4X or Y	1	4.3	2
P2-22020-1HF4X or Y	2	7	2
P2-22030-1HF4X or Y	3	10.5	2
X = unswitched \| Y = switched

230V, 3-PHASE IN, 230V, 3-PHASE MOTOR

Model	HP	Amps	Frame Size
P2-22010-3HF4X or Y	1	4.3	2
P2-22020-3HF4X or Y	2	7	2
P2-22030-3HF4X or Y	3	10.5	2
P2-32050-3HF4X or Y	5	18	3
X = unswitched \| Y = switched

380/460V, 3-PHASE IN, 380/460V, 3-PHASE MOTOR

Model	HP	Amps	Frame Size
P2-24010-3HF4X or Y	1	2.2	2
P2-24020-3HF4X or Y	2	4.1	2
P2-24030-3HF4X or Y	3	5.8	2
P2-24050-3HF4X or Y	5	9.5	2
P2-34075-3HF4X or Y	7.5	14	3
P2-34100-3HF4X or Y	10	18	3
X = unswitched \| Y = switched

500/600V, 3-PHASE IN, 500/600V, 3-PHASE MOTOR

Model	HP	Amps	Frame Size
P2-26010-3H04X or Y	1	2.1	2
P2-26020-3H04X or Y	2	3.1	2
P2-26030-3H04X or Y	3	4.1	2
P2-26050-3H04X or Y	5	6.5	2
P2-26075-3H04X or Y	7.5	9	2
P2-36100-3H04X or Y	10	12	3
P2-36150-3H04X or Y	15	17	3
X = unswitched \| Y = switched

115V, SINGLE PHASE IN, 230V, 3-PHASE MOTOR

Model	HP	Amp	Frame Size
E3-110023-101X or Y	0.5	2.3	1
E3-110043-101X or Y	1	4.3	1
E3-210058-104X or Y	1.5	5.8	2
X = unswitched \| Y = switched

230V, SINGLE PHASE IN, 230V, 3-PHASE MOTOR

Model	HP	Amp	Frame Size
E3-120023-101X or Y	0.5	2.3	1
E3-120043-101X or Y	1	4.3	1
E3-120070-101X or Y	2	7	1
E3-220070-104X or Y	2	7	2
E3-220105-104X or Y	3	10.5	2
*E3-320153-104X or Y	5	15.3	3
* This unit not UL Listed
X = unswitched \| Y = switched

230V, 3-PHASE IN, 230V, 3-PHASE MOTOR

Model	HP	Amp	Frame Size
E3-320153-304X or Y	5	15	3
X = unswitched \| Y = switched

380/460V, 3-PHASE IN, 380/460V, 3-PHASE MOTOR

Model	HP	Amp	Frame Size
E3-140022-301X or Y	1	2.2	1
E3-140041-301X or Y	2	4.1	1
E3-240041-304X or Y	2	4.1	2
E3-240058-304X or Y	3	5.8	2
E3-240095-304X or Y	5	9.5	2
E3-340140-304X or Y	7.5	14	3
E3-340180-304X or Y	10	18	3
X = unswitched \| Y = switched

NEMA 4X (IP66) - Dimensions

Series	P2		E3
Frame Size	2	3	1	2	3
Height (ins)	10.1″	12.2″	9.2″	10.1″	12.2″
Height (mm)	257	310	232	257	310
Width (ins)	7.4″	8.3″	6.4″	7.4″	8.3″
Width (mm)	188	211	161	188	211
Depth (ins)	9.4″	10.5″	7.1″	7.4″	9.9″
Depth (mm)	239	266	179	188	252
Weight (lbs)	10.6	17	6.8	9	16.7
Weight (kg)	4.8	7.7	3.1	4.1	7.6

AC DRIVE DOCUMENTATION

Accessories

Filename / Link	Size
2rout_user_guide_v2pt01.pdf	104.42 Kb
encod_option_user_guide_v1pt10.pdf	747.29 Kb
hvac_option_user_guide_v1pt00.pdf	128.24 Kb
logip_option_user_guide_v1pt01.pdf	405.69 Kb
optidrive_size6_choke_user_guide_v2pt00.pdf	793.97 Kb
optipad_user_guide_v1pt00.pdf	932.12 Kb
optiport2_user_guide_v1pt00.pdf	145.11 Kb
optistick_user_guide_v2pt00.pdf	305.47 Kb

Advanced User Guides

Filename / Link	Size
P2_Advanced_User_Guide_Issue_06.pdf	9.63 Mb
optidrive_plus_advanced_user_guide_v3pt05.pdf	3.14 Mb
optidrive_plus_vms_washing_machine_v1pt00.pdf	484.43 Kb

Drawings

Filename / Link	Size
ode2-1p_IP20_size1_line_drawings_dxf.zip	3.61 Mb
ode2-1p_IP20_size2_line_drawings_dxf.zip	4.55 Mb
ode2-1p_IP66_size1_line_drawings_dxf.zip	1011.4 Kb
ode2-1p_IP66_size2_line_drawings_dxf.zip	1019.14 Kb
ode2_ip55_size1_line_drawings_v1.pdf	29.42 Kb
ode2_ip55_size1_line_drawings_v1_dxf.zip	57.28 Kb
ode2_ip55_size2_line_drawings_v1.pdf	37.13 Kb
ode2_ip55_size2_line_drawings_v1_dxf.zip	87.16 Kb
ode2_size1_line_drawings_v1.pdf	174.26 Kb
ode2_size1_line_drawings_v1_dxf.zip	3.57 Mb
ode2_size2_line_drawings_v1.pdf	184.82 Kb
ode2_size2_line_drawings_v1_dxf.zip	4.33 Mb
ode2_size3_line_drawings_v1.pdf	139.08 Kb
ode2_size3_line_drawings_v1_dxf.zip	3.5 Mb
odp2_size2_IP66_drawings_dxf.zip	440.07 Kb
odp2_size3_IP66_drawings_dxf.zip	392.54 Kb
odp2_size4_IP55_drawings_dxf.zip	765.7 Kb
odp2_size5_IP55_drawings_dxf.zip	897.12 Kb
odp2_size6_IP55_drawings_dxf.zip	816.83 Kb
odp2_size7_IP55_drawings_dxf.zip	899.82 Kb
odv3_size2A_IP66_Nema-2X_drawings_dxf.zip	440.09 Kb
odv3_size3A_IP66_Nema-4X_drawings_dxf.zip	392.57 Kb
odv3_size4_IP55_Nema-4X_drawings_dxf.zip	765.73 Kb
odv3_size5_IP55_drawings_dxf.zip	897.15 Kb

JL Series

Filename / Link	Size
jl-series_product_manual_v5pt15k.pdf	7.06 Mb

Optidrive E2 Single Phase

Filename / Link	Size
optidrive_e2_1p_user_guide_v3pt10.pdf	3.03 Mb

APPLICATION NOTES

Filename / Link	Size
AN-ODE-2-038_modbus_RTU_control_and_register_mapping.pdf	833.91 Kb
AN-ODE-2-055_commissioning_single-phase_output_drives.pdf	321.47 Kb
AN-ODE-2-060_use_of_drive_on_generator_supplies.pdf	388.14 Kb
AN-ODE-2-070_mounting_drives_in_control_panels.pdf	686.46 Kb

Optidrive E2 Volts Per Hertz

Filename / Link	Size
optidrive_e2_ip55_nema12_user_guide_v1pt03.pdf	3.74 Mb
optidrive_e2_user_guide_v3pt30.pdf	1.92 Mb

APPLICATION NOTES

Filename / Link	Size
AN-ODE-2-001_setting_the_motor_nameplate_details.pdf	311.5 Kb
AN-ODE-2-002_setting_up_acceleration_and_deceleration_ramp_rates.pdf	317.57 Kb
AN-ODE-2-003_setting_the_required_stopping_mode.pdf	373.41 Kb
AN-ODE-2-004_locking_parameters_to_prevent_changes.pdf	386.44 Kb
AN-ODE-2-005_displaying_motor_speed_in_RPM.pdf	408.76 Kb
AN-ODE-2-006_configuring_voltage_and_current_reference_inputs.pdf	277.74 Kb
AN-ODE-2-007_using_the_skip_frequency_function.pdf	251.47 Kb
AN-ODE-2-008_selecting_the_start-restart_mode.pdf	481.1 Kb
AN-ODE-2-009_programming_the_drive_user_relay.pdf	257.1 Kb
AN-ODE-2-010_using_the_2ROUT_option.pdf	447.17 Kb
AN-ODE-2-011_using_the_display_scaling_function.pdf	391.26 Kb
AN-ODE-2-012_using_standby_mode.pdf	283.57 Kb
AN-ODE-2-014_hand_auto_operation.pdf	257.73 Kb
AN-ODE-2-015_modifying_the_V-F_output_characteristic.pdf	413.64 Kb
AN-ODE-2-017_using_the_brake_circuit.pdf	478.52 Kb
AN-ODE-2-021_setting_up_preset_speeds.pdf	597.13 Kb
AN-ODE-2-024_energy_optimisation_function.pdf	417.83 Kb
AN-ODE-2-025_remote_push-button_speed_control.pdf	326.24 Kb
AN-ODE-2-026_remote_keypad_control_with_autorun.pdf	263.89 Kb
AN-ODE-2-030_using_the_2nd_deceleration_ramp_time.pdf	236.77 Kb
AN-ODE-2-032_PI_closed_loop_feedback_control_applications.pdf	773.54 Kb
AN-ODE-2-038_modbus_RTU_control_and_register_mapping.pdf	833.91 Kb
AN-ODE-2-045_using_multiple_motors_in_parallel.pdf	618.67 Kb
AN-ODE-2-057_switching_frequency_derating_information.pdf	1.08 Mb
AN-ODE-2-060_use_of_drive_on_generator_supplies.pdf	388.14 Kb
AN-ODE-2-061_87Hz(104Hz)_operation_of_standard_induction_motors.pdf	608.08 Kb
AN-ODE-2-062_use_of_fan_components_in_drive_construction.pdf	471.18 Kb
AN-ODE-2-070_mounting_drives_in_control_panels.pdf	686.46 Kb

Optidrive E3 Open Loop Vector

Filename / Link	Size
Bardac E3 Series User Guide v2.00e.pdf	4.02 Mb
Bardac E3 Single Phase Manual 2.00e.pdf	4.23 Mb

Optidrive P2 Closed Loop Vector

Filename / Link	Size
Bardac P2 Manual ver 3.01 HR.pdf	6.88 Mb
Bardac_P2 Solar Pump User Guide_V1.02_2018-4-12.pdf	2.38 Mb

APPLICATION NOTES

Filename / Link	Size
AN-ODP-2-001_setting_the_motor_nameplate_details.pdf	557.88 Kb
AN-ODP-2-002_setting_up_acceleration_and_deceleration_ramp_times.pdf	379.47 Kb
AN-ODP-2-003_selecting_the_required_stopping_mode.pdf	416.96 Kb
AN-ODP-2-004_locking_parameters_to_prevent_changes.pdf	342.46 Kb
AN-ODP-2-005_displaying_motor_speed_in_RPM.pdf	377.51 Kb
AN-ODP-2-006_configuring_voltage_and_current_reference_inputs.pdf	358.09 Kb
AN-ODP-2-007_using_the_skip_frequency_function.pdf	323.63 Kb
AN-ODP-2-008_selecting_the_start-restart_mode.pdf	481.54 Kb
AN-ODP-2-009_programming_the_drive_user_relays.pdf	348.66 Kb
AN-ODP-2-010_additional_relay_output_option_modules.pdf	401.8 Kb
AN-ODP-2-011_using_the_display_scaling_function.pdf	556.9 Kb
AN-ODP-2-012_using_standby_mode.pdf	274.02 Kb
AN-ODP-2-015_modifying_the_constant_V-F_output_characteristic.pdf	551.96 Kb
AN-ODP-2-021_setting_up_preset_speeds.pdf	752.74 Kb
AN-ODP-2-024_energy_optimisation_function.pdf	489.91 Kb
AN-ODP-2-025_remote_push-button_speed_control.pdf	470.38 Kb
AN-ODP-2-027_master-slave_network_operation.pdf	568.29 Kb
AN-ODP-2-034_hoist_applications.pdf	343.87 Kb
AN-ODP-2-038_modbus_RTU_control_and_register_map.pdf	796.09 Kb
AN-ODP-2-045_using_multiple_motors_in_parallel.pdf	652.53 Kb
AN-ODP-2-050_permanent_magnet_motor_control.pdf	417.3 Kb
AN-ODP-2-058_encoder-less_vector_control_for_3-phase_induction_motors.pdf	564.69 Kb
AN-ODP-2-060_drives_on_generator_supplies.pdf	458.57 Kb
AN-ODP-2-070_mounting_drives_in_control_panels.pdf	685.66 Kb

Optidrive V2 HVAC

Filename / Link	Size
optidrive_v2_bacnet_user_guide_v1pt00.pdf	1.5 Mb
optidrive_v2_user_guide_v2pt00.pdf	3.09 Mb

APPLICATION NOTES

Filename / Link	Size
AN-ODV-2-001_setting_the_motor_nameplate_data.pdf	312.54 Kb
AN-ODV-2-002_setting_up_acceleration_and_deceleration_ramp_rates.pdf	318.53 Kb
AN-ODV-2-003_selecting_the_required_stopping_mode.pdf	482.62 Kb
AN-ODV-2-004_locking_parameter_to_prevent_changes.pdf	387.07 Kb
AN-ODV-2-005_displaying_motor_speed_in_RPM.pdf	299.33 Kb
AN-ODV-2-006_configuring_voltage_and_current_reference_inputs.pdf	288.83 Kb
AN-ODV-2-007_using_the_skip_frequency_function.pdf	253.34 Kb
AN-ODV-2-008_selecting_the_start-restart_mode.pdf	496.2 Kb
AN-ODV-2-009_programming_the_drive_output_relays.pdf	276.44 Kb
AN-ODV-2-010_additional_relay_output_modules.pdf	318.8 Kb
AN-ODV-2-011_using_the_display_scaling_function.pdf	494.01 Kb
AN-ODV-2-012_using_standby_mode.pdf	412.69 Kb
AN-ODV-2-015_modifying_the_VF_characteristic.pdf	304.97 Kb
AN-ODV-2-021_setting_up_preset_speeds.pdf	749.3 Kb
AN-ODV-2-024_energy_optimisation_function.pdf	419.15 Kb
AN-ODV-2-025_remote_push-button_speed_control.pdf	400.97 Kb
AN-ODV-2-027_master-slave_network_operation.pdf	411.4 Kb
AN-ODV-2-038_modbus_RTU_control_and_register_mapping.pdf	676.98 Kb
AN-ODV-2-045_using_multiple_motors_in_parallel.pdf	616.68 Kb
AN-ODV-2-051_using_the_external_extended_IO_module.pdf	456.94 Kb
AN-ODV-2-060_use_of_drives_on_generator_supplies.pdf	407.9 Kb
AN-ODV-2-062_use_of_fan_components_in_drive_construction.pdf	572.99 Kb
AN-ODV-2-068_using_optiflow_multi_pump_cascade_control.pdf	480.53 Kb
AN-ODV-2-073_multi_pump_cascade_control.pdf	367.3 Kb
AN-ODV-2-074_using_the_maintenance_timer.pdf	261.11 Kb
AN-ODV-2-075_load_torque_monitoring_function.pdf	343 Kb
AN-ODV-2-076_using_the_pump_clean_function.pdf	342.9 Kb
AN-ODV-2-077_using_the_pump_stir_function.pdf	305.94 Kb
AN-ODV-2-078_bypass_operation.pdf	365.73 Kb
AN-ODV-2-080_motor_pre-heating_function.pdf	319.85 Kb

Optidrive V3 Eco

Filename / Link	Size
Bardac V3 Eco User Guide Rev 2.02g.pdf	5.25 Mb

APPLICATION NOTES

Filename / Link	Size
AN-ODV-3-001_setting_the_motor_nameplate_data.pdf	316.07 Kb
AN-ODV-3-002_setting_up_acceleration_and_deceleration_ramp_rates.pdf	315.69 Kb
AN-ODV-3-003_selecting_the_required_stopping_mode.pdf	395.64 Kb
AN-ODV-3-004_locking_parameters_to_prevent_changes.pdf	366.85 Kb
AN-ODV-3-005_choosing_Hz_or_RPM.pdf	313.35 Kb
AN-ODV-3-006_configuring_voltage_and_current_reference_inputs.pdf	289.09 Kb
AN-ODV-3-007_using_the_skip_frequency_function.pdf	254.63 Kb
AN-ODV-3-008_selecting_the_start-restart_mode.pdf	437.45 Kb
AN-ODV-3-009_programming_the_drive_output_relays.pdf	280.4 Kb
AN-ODV-3-010_additional_relay_output_modules.pdf	320.03 Kb
AN-ODV-3-011_using_the_display_scaling_function.pdf	464.56 Kb
AN-ODV-3-012_using_standby_mode.pdf	380.55 Kb
AN-ODV-3-015_constant_or_variable_torque_operation.pdf	256.39 Kb
AN-ODV-3-038_modbus_RTU_control_and_register_mapping.pdf	652.99 Kb
AN-ODV-3-078_bypass_operation.pdf	310.87 Kb

Top

NEMA 4X (IP66)
Enclosed AC Drives
For harsh, wet & dirty environments

Overview

- Switched -

version with keypad, display, speed pot, forward/off/reverse switch, and power isolator switch.

- Unswitched -

version with keypad and display.

NEMA 4X (IP66)

FEATURES

Options:

NEMA 4X ... very smart drives!

- drive.web smart automation -

NEMA 4X (IP66)

MODEL NUMBERS

P2 SERIES
OPEN/CLOSED LOOP VECTOR DRIVES

With EMC filter, brake transistor +/- DC bus

E3 SERIES
GENERAL PURPOSE VFD

NEMA 4X (IP66) - Dimensions

AC DRIVE DOCUMENTATION

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

Contact

Products

Get to Know Us

Search Bardac.com

NEMA 4X (IP66) Enclosed AC Drives For harsh, wet & dirty environments

Overview

- Switched -

version with keypad, display, speed pot, forward/off/reverse switch, and power isolator switch.

- Unswitched -

version with keypad and display.

NEMA 4X (IP66)

FEATURES

Options:

NEMA 4X ... very smart drives!

- drive.web smart automation -

NEMA 4X (IP66)

MODEL NUMBERS

P2 SERIES OPEN/CLOSED LOOP VECTOR DRIVES

With EMC filter, brake transistor +/- DC bus

E3 SERIES GENERAL PURPOSE VFD

AC DRIVE DOCUMENTATION

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

APPLICATION NOTES

Contact

Products

Get to Know Us

Search Bardac.com

NEMA 4X (IP66)
Enclosed AC Drives
For harsh, wet & dirty environments

P2 SERIES
OPEN/CLOSED LOOP VECTOR DRIVES

E3 SERIES
GENERAL PURPOSE VFD