Overview
Single Phase
DC Systems Drives
This family of single phase DC drives with isolated control circuitry, is designed to meet the most exacting requirements of high performance systems builders.
It is a range of full featured products using advanced manufacturing technologies to give unequaled value and functionality to OEMs and System Integrators with world wide markets and demanding applications.
Features
Single Phase
DC Systems Drives
Standard Features:
- Approvals: CE
- Linear torque control
- Armature voltage or tach feedback
- Calibration range switches
- Speed reference 0-10V or 4-20mA
- Maximum and minimum speed settings
- Adjustable current limit
- Current range switch selectable (not on 400i)
- Independently adjustable up and down ramps
- 150% overload capacity, 30 second stall timer
- Stall relay contact output (transistor on 400i)
- Zero speed relay contact (transistor on 400i)
- Control fuses fitted (Power fuse on 400i)
- Start inhibit after power loss
- Power on and stall indicator LEDs
- Speed signal output
- Current signal output
- Ramp signal output
- Total demand signal output
- Dual supply voltage 110 / 230 VAC, 50/60Hz
- Suitable for shunt or PM motors
- IR compensation
- Stability adjustment
Additional Regen Drive Features:
- Speed reference +/-10V or 4-20mA
- Speed trim input
- Independent up & down ramps in FWD & REV
- Separate adjustable current limits motor/brake
- Torque control in either 2 or 4 quadrants
- Relay for Stall, Zero speed, Reverse, Overload
- Control fuses fitted
- Fast, ramped or coast stop
- LEDs for + current, - current, stall & stall timer
- Momentary contact for reversing applications
Enclosed Drives:
Enclosed wall mounting versions of these drives and a wide range of other options are available. Please call (410) 604-3400 for more information.
Model 400i, up to 0.75hp
4” x 6.25” x 2” (100 x 160 x 50mm)
- - - -
4” x 6.25” x 2” (100 x 160 x 50mm)
- - - -
Model 1600i, up to 3hp
6.1” x 6.1” x 3.4” (150 x 150 x 85 mm)
- - - -
6.1” x 6.1” x 3.4” (150 x 150 x 85 mm)
- - - -
Model 3200i, up to 7.5hp
6.1” x 8.0” x 4.2” (150 x 200 x 105 mm)
- - - -
6.1” x 8.0” x 4.2” (150 x 200 x 105 mm)
- - - -
Model 3600XRi
Up to 32 amps - 6.9”x 8”x 3.2” (175x200x80 mm)
36 amps unit - 6.9”x 8”x 3.8” (175x200x95 mm)
Up to 32 amps - 6.9”x 8”x 3.2” (175x200x80 mm)
36 amps unit - 6.9”x 8”x 3.8” (175x200x95 mm)
Models & Ratings
| NON-REGEN MODELS | 230VAC, 180VDC | 115VAC, 90VDC | FUSE KIT |
| 400i (4 amps) | 0.75hp | 0.4hp | included |
| 1600i (16 amps) | 3hp | 1.5hp | F2-30 |
| 3200i/32 (32 amps) | 6hp | 3hp | F2-60 |
| 415VAC, 320VDC | 240VAC, 180VDC | ||
| 3200i/48LL (48 amps) | 7.5hp | 4hp | F2-80 |
| 460VAC, 360VDC | 230VAC, 180VDC | ||
| 3200i/32C109 (32 amps) | 8hp | 5hp | F2-60 |
| 4-Q REGEN, REVERSING MODELS | 230VAC, 180VDC | 115VAC, 90VDC | |
| 3600XRi/16 | 3hp | 1.5hp | F3-30 |
| 3600XRi/32 | 6hp | 3hp | F3-60 |
| 3600XRi/36 | 6.5hp | 3hp | F3-60 |
| 415VAC, 320VDC | 240VAC, 180VDC | ||
| 3600XRi/36LL | 10hp | 6hp | F3-60 |
| 480VAC, 360VDC | 240VAC, 180VDC | ||
| 3600XRi/32C132 | 10hp | 6hp | F3-60 |
Optional drive.web smarty:
For complete process automation. Model dw210-1107 uses discrete i/o interface to provide:
- Ethernet networking
- Internet access
- Powerful function block programming
- ModbusRTU and ModbusTCP/IP
- Additional remote i/o
- Encoder feedback
DC Drives for OEMs
Model 370 - OEM Chassis Drives
Compact, DC drives designed for low cost, non-regenerative, non-isolated machine controls.Basic Specification:
- Rating: 1/4hp at 90VDC, 1/2hp at 180VDC
- Maximum and minimum speed settings
- Current limit
- Acceleration pot
- Suitable 110 or 230 volts, single phase, 50 or 60Hz (not-isolated)
- For use with permanent magnet or shunt field motors
- Approval: CE
4” x 4” x 1.6” (100 x 100 x 40mm)
Models 400, 800, 1200 - OEM DC Drives
Versatile, basic, low cost drives suitable for wide range of machine control applications.| Model | Amps | Description | @ 180VDC | @ 90VDC | Dimensions |
| 400 | 4 amps | Open chassis with screw terminals | 0.75hp | 0.38hp | 5.2” x 4.0” x 1.6” (130 x 100 x 40mm) |
| 800 | 8 amps | Open chassis with screw terminals | 1.5hp | 0.75hp | 5.2” x 4.0” x 2.8” (130 x 100 x 70mm) |
| 1200 | 12 amps | Open chassis with screw terminals | 2.0hp | 1.0hp | 5.2” x 4.0” x 2.8” (130 x 100 x 70mm) |
| 400E | 4 amps | Enclosed NEMA 1 with pot, switch, fuse | 0.75hp | 0.38hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
| 800E | 8 amps | Enclosed NEMA 1 with pot, switch, fuse | 1.5hp | 0.75hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
| 1200E | 12 amps | Enclosed NEMA 1 with pot, switch, fuse | 2.0hp | 1.0hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
| 400ERB | 4 amps | Enclosed, pot, switch, brake, reverse, fuse | 0.75hp | 0.38hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
| 800ERB | 8 amps | Enclosed, pot, switch, brake, reverse, fuse | 1.5hp | 0.75hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
| 1200ERB | 12 amps | Enclosed, pot, switch, brake, reverse, fuse | 2.0hp | 1.0hp | 9.9” x 7.0” x 3.8” (250 x 177 x 95mm) |
Standard Features:
- Linear torque control
- Armature voltage or tach feedback with IR compensation
- Calibration range switches (no component changes)
- Speed reference 0-10V or 4-20mA
- Maximum and minimum speed settings
- Adjustable current limit
- Independently adjustable up and down ramps
- 150% overload capacity with 30 second stall timer
- Stall and Zero Speed relay driver outputs
- Power fuse (up to 12 amps)
- Power on and stall indicator LEDs
- Stability adjustment
- Speed, Ramp Speed and Current signal outputs
- International supply voltages 110 / 230 VAC, 50/60hz (not isolated)
- Suitable for shunt wound or permanent magnet motors
- Approvals: CE
Model 400E
9.9” x 7.0” x 3.8”
(250 x 177 x 95mm)
9.9” x 7.0” x 3.8”
(250 x 177 x 95mm)
Dimensions
Product dimensions are in progress!
| Model | 400i | 1600i | 3200i/32 | 3200i/48LL | 3200i/32C109 | 3600XRi/16 | 3600XRi/32 | 3600XRi/36 | 3600XRi/36LL | 3600XRi/32C132 |
| Height (ins) | 6.3 | 5.9 | 5.9 | – | – | 6.9 | – | – | – | – |
| Height (mm) | 160 | 150 | 150 | – | – | 175 | – | – | – | – |
| Width (ins) | 3.9 | 5.9 | 7.8 | – | – | 7.8 | – | – | – | – |
| Width (mm) | 100 | 150 | 200 | – | – | 200 | – | – | – | – |
| Depth (ins) | 2 | 3.5 | 4.3 | – | – | 2.7 | – | – | – | – |
| Depth (mm) | 50 | 90 | 110 | – | – | 70 | – | – | – | – |
| Weight (lbs) | – | – | – | – | – | – | – | – | – | – |
| Weight (kg) | – | – | – | – | – | – | – | – | – | – |
Images
Product images are coming soon!
Downloads
DC Drive Documentation
1-Phase Analog
| Filename / Link | Size |
|---|---|
| 1600_1600i_3200i_1ph_drv_v6.pdf | 205.49 Kb |
| 300_1ph_oem_drive_v4.pdf | 106.71 Kb |
| 3200imp015_hv_field_control_d.pdf | 14.09 Kb |
| 3600XRi_Manual_HG105008_Issue1.pdf | 3.89 Mb |
| 370_1ph_oem_drive_v5.pdf | 113.52 Kb |
| 370e_400e_800e_1200e_enclosure_manual_v4.pdf | 138.04 Kb |
| 400_800_1200_1ph_oem_drv_v4.pdf | 175.89 Kb |
| 400i_e400i_1ph_sys_drv_v4.pdf | 176.3 Kb |
| field_controller_1600i_3200imp005_e.pdf | 14.44 Kb |
| field_controller_3200iMP028_a.pdf | 57.26 Kb |
| field_controller_3200imp015_high_voltage_d.pdf | 14.09 Kb |
| field_controller_400imp004_c.pdf | 13.22 Kb |
| k340_680_1220_product_manual_v9.pdf | 699.37 Kb |
| k340i_680i_1220i_application_manual_v3.pdf | 1.09 Mb |
| k340i_680i_1220i_product_manual_v15.pdf | 1.02 Mb |
| k340xri_680xri_1220xri_application_manual_v3.pdf | 1.13 Mb |
| k340xri_680xri_1220xri_product_manual_v15.pdf | 847.93 Kb |
3-Phase Analog
| Filename / Link | Size |
|---|---|
| powersle_basic_start_v1pt1.pdf | 107.24 Kb |
| powerslx_basic_start_v3pt1.pdf | 182.96 Kb |
| sl_3ph_2q_analog_drive_v6.pdf | 11.29 Mb |
| sle_3ph_2q_oem_drive_v4.pdf | 6.2 Mb |
| slx_3ph_4q_analog_drive_v6.pdf | 9.8 Mb |
| slx_basic_start_v3pt1.pdf | 129.23 Kb |
| slx_low_hp_modulus.pdf | 26.97 Kb |
3-Phase Digital
Ancilliary
| Filename / Link | Size |
|---|---|
| dpm35s_sd_digital_meter_v1.pdf | 327.93 Kb |
| lf3_3ph_line_filter.pdf | 13.63 Kb |
| pla_application_man_v5pt12.pdf | 4.92 Mb |
| sp1060d_f2v_board_v3.pdf | 167.13 Kb |
| sp1061d_bidir_f2v_board_v2.pdf | 26.75 Kb |
| sp1070d_buffer_card_v11.pdf | 483.65 Kb |
| sp1070pid_v98e.pdf | 224.8 Kb |
| sp1080d_reversing_unit_v2.pdf | 332.09 Kb |
Certifications
| Filename / Link | Size |
|---|---|
| ce_certification.pdf | 215.72 Kb |
| csa_certification_1ph.pdf | 350.79 Kb |
| emc_compliance.pdf | 483.91 Kb |
| emc_installation_guidelines.pdf | 51.62 Kb |
| ul_certification_kseries.pdf | 497.99 Kb |
| ul_certification_plseries.pdf | 304.27 Kb |
DC Servo Drives
| Filename / Link | Size |
|---|---|
| 200xlv_regen_dc_servo_v1.pdf | 172.66 Kb |
| 400-800-1200xlv_dc_servo_controller_datasheet_v3.pdf | 439.94 Kb |
| 400-800-1200xlv_regen_dc_servo_v2.pdf | 1.17 Mb |