DC Servo Drives

Home » DC Drives » DC Servo Drives
These drives are designed for small, high performance position and speed control applications such as robotics, mechanical handling, automated assembly, packaging processes, machine tool axis, etc.

The control circuits are designed to ensure extremely low noise emissions, and will meet the most stringent of EMC (Electro-Magnetic Compliance) requirements.

Models 400XLV, 800XLV & 1200XLV
4-Quadrant DC Drives

These products are designed for small, high performance position and speed control applications such as robotics, mechanical handling, automated assembly, packaging processes, machine tool axis, etc.

Standard Features:
  • Speed, or Torque control modes
  • Extremely low RF noise emissions
  • Ready indicator light
  • Motor voltage range: +/-6 VDC to +/-48 VDC
  • Armature current ratings of 2, 4, 8 and 12A
  • Supply voltage 12 to 48 VDC
  • Precision 5v and 10v references
  • Differential setpoint inputs (300K ohms)
  • Overload trip
  • Thermal protection
  • Adjustable Maximum Speed
  • Adjustable IR Compensation for armature volts f/b
  • Plug-on terminals
  • DIN rail mounting (optional on 200XLV)
  • Approvals: CE

Dimensions:
400XLV: 4.2”h x 2.4”w x 4.75”d (106 x 61 x 120mm)
800XLV: 4.2”h x 2.75”w x 4.75”d (106 x 70 x 120mm)
1200XLV: 4.2”h x 2.75”w x 4.75”d (106 x 70 x 120mm)

Linear Amplifier


The units are miniature, fast response, reversing, linear transistor drives for brushed DC motors with armatures up to 48 volts. They operate from either a smoothed, unregulated, rectified DC, or battery supply, and include built in thermal protection, current limit with short term overcurrent capacity and resettable overload trip.

Model 200XLV 4-Quadrant DC Drive

Miniature unit with built in “P” or “P+I” or “PID” (Proportional, Integral, Derivative) for closed loop position, speed or torque control.

Optional Configurations:
  • Speed control, armature voltage feedback with IR compensation.
  • Speed control, tach feedback.
  • Position control, position feedback.
  • Torque control with armature current feedback.
Dimensions:
3.25” x 1.65” x 1.65” (82 x 40 x 40mm)
200XLV-CLP

DC DRIVE DOCUMENTATION

Filename / LinkSize
Bardac_PL-PLX_Manual_Complete.pdf19.35 Mb
Bardac_PL-PLX_Manual_Part1_Digital_DC_Drive.pdf12.88 Mb
Bardac_PL-PLX_Manual_Part2_Application_Blocks.pdf4.66 Mb
Bardac_PL-PLX_Manual_Part3_High_Power_Modules.pdf1.21 Mb
Bardac_PL-PLX_Manual_Part4_Default_Block_Diagram.pdf1.1 Mb
Bardac_PLXD_Manual_v7.0.pdf8.82 Mb
dwoption_42_45_pl-series_encoder_interface_v1pt2.pdf279.48 Kb
frame-1_powerplx15_50_dimensions_c.pdf91.87 Kb
frame-1_powerplx15_50_wiring_c.pdf71.17 Kb
frame-2_powerplx65_145_layout_b.pdf203.72 Kb
frame-2_powerplx65_145_wiring_e.pdf84.35 Kb
frame-2_powerplx65_145mp40_layout_a.pdf92.96 Kb
frame-2_powerplx65_145mp40_wiring_a.pdf151.08 Kb
frame-3_powerplx185_265_layout_c.pdf249.64 Kb
frame-3_powerplx185_265_wiring_d.pdf101.7 Kb
frame-4_powerplx275_400_layout_a.pdf479.77 Kb
frame-4_powerplx275_400_wiring_a.pdf82.8 Kb
pl-series_appnote_01_fast_stop_b.pdf79.62 Kb
pl-series_appnote_02_3wire_control_c.pdf96.09 Kb
pl-series_appnote_03_reversing_b.pdf72.36 Kb
pl-series_appnote_04_loadshare_a.pdf496.57 Kb
pl-series_comparison_guide_n.pdf257.06 Kb
pl-series_control_board_replacement_a.pdf310.7 Kb
pl-series_features_summary.pdf4.71 Kb
pl-series_low_hp_modulus.pdf31.51 Kb
pl-series_modulus_typical_low_hp.pdf31.51 Kb
pl-series_quick_start_v4.pdf2.99 Mb
pl-series_serial_comms_v5pt12.pdf1.32 Mb
pl-series_stack_driver_manual_v5pt15h.pdf635.75 Kb
pl-series_stack_driver_typical_layout.pdf102.89 Kb
pl-series_stack_driver_typical_wiring.pdf198.14 Kb
plxd_high_hp_layout.pdf102.89 Kb
plxd_high_hp_wiring.pdf198.14 Kb